Your changes will require approval by an administrator before they are published.
The article has been updated successfully but requires approval before it is published.AudioCodes MP-11x/MP-124 Configuration for MAXCS 7.5
Updated May 20, 2015.If you are using MaxCS Release 7.5 Patch 1, refer to Article #1179 instead of this article.
This guide explains how to configure the following features for an AudioCodes MP-11x or MP-124 gateway:
- FXS (Analog) support
- FXO
- Fax-over IP (FoIP) T.38 (MP-118 only)
- PSTN Survivability
- Centrex configuration
Attachments
- MP118_Combined.pdf (2,131,904 bytes)
- usa_tones_13_NoHold.dat (8,672 bytes)
- usa_tones_13_NoHold.ini (5,079 bytes)
Related Articles
- AudioCodes Mediant Gateway Configuration for MAXCS 8.5
- AudioCodes Mediant Gateway Configuration for MAXCS 8.0
- AudioCodes MP-11x/MP-124 Configuration for MAXCS 8.0
- AudioCodes MP-11x/MP-124 Configuration for MAXCS 8.5.1
- AudioCodes Mediant Gateway PRI / TLS Configuration for MAXCS 7.5 Patch 1
Visitor Comments
Article Details
Last Updated
20th of May, 2015
