Updated February 11, 2015.

If you are configuring an MP-202 device for Release 7.0 on AltiGen SIP trunks, refer to Article 1165.

If you are configuring an MP-202 device for Release 7.0 on Workspace SIP Trunks, refer to Article #1108.

If you are configuring an MP-202 device for Release 7.5 on a non-HMCP deployment, refer to Article 1165. 

This guide explains the changes required to configure the AudioCodes MP-202 Adapter for MAXCS 7.5. These instructions apply only to HMCP systems using AltiGen-provided SIP Trunks.  In order to implement fax support, your environment must meet the following requirements:

• You must have an AudioCodes MP-202 Telephone adapter
• You will need to provision an additional SIP Trunk group for the adapter
• You must have a dedicated public IP address assigned directly to the MP-202 adapter