AudioCodes MP-202 Configuration for MaxCS 7.5 - AltiGen SIP Trunks

Updated February 11, 2015.

If you are configuring an MP-202 device for Release 7.0 on AltiGen SIP trunks, refer to Article 1165.

If you are configuring an MP-202 device for Release 7.0 on Workspace SIP Trunks, refer to Article #1108.

If you are configuring an MP-202 device for Release 7.5 on a non-HMCP deployment, refer to Article 1165


This guide explains the changes required to configure the AudioCodes MP-202 Adapter for MAXCS 7.5. 
These instructions apply only to HMCP systems using AltiGen-provided SIP Trunks.  In order to implement fax support, your environment must meet the following requirements:

  • You must have an AudioCodes MP-202 Telephone adapter
  • You will need to provision an additional SIP Trunk group for the adapter
  • You must have a dedicated public IP address assigned directly to the MP-202 adapter



Attachments

Related Articles

No related articles were found.

Visitor Comments

Article Details

Last Updated
14th of May, 2015

Would you like to...

Print this page  Print this page

Email this page  Email this page

Post a comment  Post a comment

 Subscribe me

Subscribe me  Add to favorites

Remove Highlighting Remove Highlighting

Edit this Article

Quick Edit

Export to PDF


User Opinions



How would you rate this answer?




Thank you for rating this answer.

Continue