Loop Back for Triton T1 Board (Tech Note)

Loop Back for Triton T1 Board (Tech Note)


Symptoms: I am receiving errors on my T1/PRI and would like to test the Triton T1 card in a loopback configuration.

 

Resolution (Permanent):

Take an RJ-45 plug and bridge the Pin 1 to Pin 4 (transmit) and Bridge Pin 2 to Pin 5 (Receive). Plug that straight to the back of the card. You should immediately get a Green light and your T1 trunks should stay Idle. It may be necessary to reset the span after plugging in the loopback connector for the trunks to go idle.

 

For T1 Socket (RJ-45/RJ-48)

Receive Ring = Pin 1

Receive Tip = Pin 2

Transmit Ring = Pin 4

Receive Tip = Pin 5



Attachments

No attachments were found.

Related Articles

Visitor Comments

Article Details

Last Updated
5th of April, 2010

Would you like to...

Print this page  Print this page

Email this page  Email this page

Post a comment  Post a comment

 Subscribe me

Subscribe me  Add to favorites

Remove Highlighting Remove Highlighting

Edit this Article

Quick Edit

Export to PDF


User Opinions



How would you rate this answer?




Thank you for rating this answer.

Continue