Level3 SIP Trunk Application Notes [Article]
Mar. 2015 Note: As of 7.5 Level3 is no longer a certified supported SIP Trunk for MaxCS.
Table of Conte
- AudioCodes MP-202 Configuration Guide for 7.0 - AltiGen SIP Trunks [Article]
- AltiGen SIP-Trunk Configuration For SoTel [Article]
February 2015: For instructions on configuring SoTel SIP trunks for MaxCS Release 7.5, see article 1173. Click
- IP Phone paging with multi-homed MaxCS Servers [Article]
When configuring a MaxCS server with multiple IP addresses, the multicast IP packets that are used for IP phone paging will likely egress the MaxCS Private Cloud server from the source address that
- AudioCodes MP-11x Analog Configuration Guide for MaxCS 7.0 Update 1 [Article]
Update 4/10/2014: Added steps to configure E911 Location-Based Caller ID for MaxCS 7.0 Update 1.
- AudioCodes MP-202 Configuration Guide for 7.0 - Workspace SIP Trunks [Article]
Note: This article applies only to Workspace SIP Trunks. If you are configuring an MP-202 device for Release 7.0 on AltiGen SIP tr
- MaxCS 7.0 MultiVoIP Configuration Guide [Article]
Updated 11/26/2014 This document provides guidelines for setting up a MultiTech gateway as a remote SIP trunking gateway for MaxCS Release 7.0, and for co
Salesforce Connector Configuration.pdf [Attachment in Salesforce Connector Configuration Guide for MaxCS 7.5]
0
- TFTP with MaxCS server behind NAT [Article]
AltiGen packages firmware and boot-code for it's IP phones with a TFTP utility named TFTPNat. While this software is (as the name implies) designed to serve the firmware in a manner that is NAT frie
- Configuration Guide AudioCodes MP202.pdf [Attachment in AudioCodes MP-202 Configuration Guide for 7.0 - Workspace SIP Trunks]
0
- RDP Connections fail with a message that users must change password [Article]
NOTE: You can download an rdp connection that already has CredSSP
- MaxCS 7.0 Update 1 All-software Solution Deployment Guide [Article]
Updated 7/14/14: Clarification to system requirements This document is provided for AltiGen Partners who will be performin a fresh installation of MaxCS 7
- Polycom IP Phone Configuration Guide MaxCS 7.0 [Article]
Note: This article is for MaxCS Release 7.0. For MaxCS 7.0 Update 1, refer to this docum
IPSec_VPN_Configuration_Form.doc [Attachment in IPSec VPN Configuration Form for MaxCS Private Cloud]
\ MAXCS Private Cloud\ IPSec VPN Configuration\ MaxCS does not support VoIP domain between MaxCS servers. Historically, multi-site customer
- MultiTech Gateway Application Note [Article]
Note: For MaxCS 7.0 and above, refer to this document
- FXS Configuration with AudioCodes.pdf [Attachment in AudioCodes MP-11x Analog Configuration Guide for MaxCS 7.0 Update 1]
0
MaxCS Private Cloud Site Survey Voice.docx [Attachment in MaxCS Private Cloud Site Survey for Voice]
MAXCS Private Cloud Voice account. Account Form completed by: IT Contact Minimum 2 weeks out; if porting, 30 days out New or existing account : If this is an existing account: Call Center? Current Cur...
- IP Phone Auto Discovery [Article]
Auto discovery has been added to firmware versions 2x91 and above. This feature was intended to make deploying many phones at once much easier. Set the DHCP option 120 message on your DHCP server to
- Polycom IP Phone Configuration Guide MaxCS7.pdf [Attachment in Polycom IP Phone Configuration Guide MaxCS 7.0]
0
- Migration to a MaxCS All-Software Solution [Article]
The All Software Solution is a newly released MaxCS 6.7 configuration that allows
