This guide describes how to configure an AudioCodes Mediant 1000 gateway for use with MAXCS 8.0.

For instructions on setting up the gateway device's firewall, refer to Article 1242. 


Please note the following considerations before you begin the procedures in this guide:

• The examples in this guide illustrate the configuration for a Mediant 1000 gateway.  For other models, adjust the port settings as needed.

•  AltiGen does not provide general configuration support for AudioCodes devices. Contact AudioCodes support for assistance with general setup.

 Refer to your gateway’s product documentation, which came with your device, for installation instructions and to retrieve the IP address of the AudioCodes web configuration tool.